slims-ambient …
Live deliveries since the server started; backfills report in the log.
The sink is off: start mock-sensors with MOCK_AMBIENT_URL and MOCK_AMBIENT_TOKEN (or the MQTT mode) to send to slims-ambient. Previews and live values work without it.
Kits
No ES105 kits yet. The Beinasco pilot is two kits (KIT-P1, KIT-P2), each an ES105-5-PM, an ES105-5-CO2 and an ES105M with NO₂, every 15 minutes.
The same site text gives the same traffic, weather and stagnant days on every device.
Scenarios (to raise alarms) …
Applied scenarios are saved on the devices as episodes: the live run and every backfill replay them where they fall. Sending applies pending changes first.
Send
The server generates and sends. Live sends each quarter of an hour as it ends; the platform refuses readings in the future, so time is never accelerated: the past days fill the dashboards.
Preview: the last 3 days
At 0.1 ppm (≈ 191 µg/m³ a step) the sensor reads 0 for the usual NO₂ of the avenue (about 30 µg/m³, 0.016 ppm) and jumps to about 191 only near the hourly limit of 200: NO₂ cannot be followed below it (slims-ambient D-20).
slims-ambient has no metric with this name yet: the readings are sent and refused as unknown_metric.